RWC

Road Worthy Certificates

Cheap Motorcycle Roadworthy RWC – $99.00 if it passes on the first inspection

Sixty Degrees Motorcycles is a licensed VicRoads Roadworthy RWC testing site at Notting Hill. Some of the areas we service are Clayton, Chadstone, Mount Waverley, Glen Waverley, Oakleigh, Springvale, Burwood and all East and South Eastern Melbourne suburbs.

We can offer RWC Roadworthy inspections every day that we are open. We offer a ‘While You Wait’ service which takes around 1 hour (bookings required). We are also one of the cheapest for your roadworthy inspection in Melbourne.

Our Roadworthy Examinations are conducted in a fair and reasonable manner.  If your bike passes the first time, it passes – simple.  We don’t ‘find’ things wrong with your bike, just to get some extra money out of our customers.  If any items are found in your RWC inspection, we are more than happy to show you what the issue is and what needs to be done to pass the RWC.

Please Note: First Inspection is $99.00 pass or fail.   There is a second inspection fee of $45.00 for all that require one.

Some basic items to check before bringing your bike in for a Roadworthy Test
this will save you, your own valuable time:

Tyres

Tyres must have over 1.5mm of tread at the lowest point on the tyre – no cracks in the rubber.

Oil leaks

There can be no oil leaks that drip onto the ground

Number plate light globe

Must be white and clearly illuminate the number plate

Bearings

All bearings must be in good working condition with smooth operation – no binding or notchy-ness at all

Horn

All motorbikes must have a properly working horn

Indicators

Indicators must flash yellow and between 60-120 times per minute

Lights

Headlight, stop tail and dash lights must be correctly operative.

Chain & sprockets

Chain & sprockets must be in good working condition and not excessively worn

Fender eliminators

Most fender eliminators do not pass roadworthy, but in most cases we have a low cost solution to re-fitting the original fender. The rear fender must have a reflector.

Brake pads & discs

Your brake pads must be over 1mm thickness and your brake discs cannot be worn past the limit specified on the disc

Fork seals

There can be no oil leaking from your fork seals

Aftermarket exhausts

Motorcycles manufactured after 1984 must have exhausts that read 94db or lower to pass roadworthy. Most aftermarket exhausts exceed this but we can sometimes provide a solution if you do not have the OEM exhaust

The above are only some of the criteria that a motorcycle has to satisfy to successfully obtain a Roadworthy Certificate (RWC). There are many more checks conducted during a Roadworthy Test by our licensed testers and examiners.

Your Motorcycling Hub

Providing quality work & products, but advice, monthly BBQ & social rides, training and that real community feel.

Opening Hours

Monday: 8am - 5.30pm

Tuesday: 8am - 5.30pm

Wednesday: 8am - 5.30pm

Thursday: 8am - 7pm

Friday: 8am - 5.30pm